Shopping Cart

Hydrowear Reversible Bodywarmer
Product code: LVSBFLPOR025
  • Colour Orange/ Grey
  • Size S
Hydrowear Reversible Bodywarmer
Product code: LVSBFLPOR025
  • Colour Orange/ Grey
  • Size S
Hydrowear Reversible Bodywarmer
Product code: LVSBFLPOR025
  • Colour Orange/ Grey
  • Size S
Hydrowear Reversible Bodywarmer
Product code: LVSBFLPOR025
  • Colour Orange/ Grey
  • Size S
Hydrowear Reversible Bodywarmer
Product code: LVSBFLPOR025
  • Colour Orange/ Grey
  • Size S

© 2022 Beeswift Limited

Gloves

Acrylic Glove
Product Code: ACG

• Acrylic fibre knit.
• One size.
• Generous fit.
• Minimal Risk.

2 Colour Heavyweight Glove
Product Code: BCYB

• Heavy weight rubber glove.
• Withstands repeated rubbing and scuffing.
• Neoprene blended natural latex
• Offers sensitivity and comfort.
• Remain flexible and wearer friendly throughout the life of the product.
• Resistant to some chemicals and acids.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 0 - Puncture
• Level 0 - ISO 13997 Cut Resistance

• EN 374-5: 2016

• EN 374-1: 2016
Chemical - Breakthrough Time
Methanol (A) - More than 30 Mins (Level 2)
Sulphuric Acid 96% (L) - More than 120 Mins (Level 4)
Sodium Hydroxide 40% (K) - More than 480 Mins (Level 6)

Touch Screen Knitted Glove
Product Code: BF10

Blue knitted polyester/cotton seamless liner
Touch screen compatible
PVC dots on palm area for added grip
Warm and comfortable fit
EN388: 2016 - 2 X 4 X A
EN511: 2006 - X 1 0

Nitrile Pu Mix Coated Glove
Product Code: BF1

• Knitted nylon/lycra glove
• Nitrile/water based PU palm and finger coating.
• Breathable, Soft and tactile finish

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 3 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance

• 7G Brushed polyester heavyweight knitted liner with Latex coated to palm area.
• Double dip to fingers for added protection.
• Vented back
• Highly visible fleeee liner.
• Ideal for refrigeration, coldstore, and winter conditions.
• Thick latex coating for durability and grip.

• EN388: 2016
• Level 2 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance

• EN 511: 2006
• Level 1 - Convective Cold
• Level 4 - Contact Cold
• Level X - Water Permeability

• EN 407: 2004
• Level X - Burning Behaviour
• Level 2 - Contact Heat
• Level X - Convective heat
• Level X - Radiant heat
• Level X - Small splashes of Molten Metal
• Level X - Large splashes of Molten Metal

• 7G Brushed polyester heavyweight knitted liner with Latex coated to palm area.
• Double dip to fingers for added protection.
• Vented back
• Highly visible fleese liner.
• Ideal for refrigeration, coldstore, and winter conditions.
• Thick latex coating for durability and grip.

• EN388: 2016
• Level 2 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 1 - Puncture
• Level B - ISO 13997 Cut Resistance

• EN 511: 2006
• Level 1 - Convective Cold
• Level 4 - Contact Cold
• Level X - Water Permeability

• EN 407: 2004
• Level X - Burning Behaviour
• Level 2 - Contact Heat
• Level X - Convective heat
• Level X - Radiant heat
• Level X - Small splashes of Molten Metal
• Level X - Large splashes of Molten Metal


• Fully lined.
• Gold leather welts.
• Gold leather reinforced thumb and part palm.
• Reinforced stitching.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level C - ISO 13997 Cut Resistance

• EN 407:2004
• Level 4 - Burning Behaviour
• Level 3 - Contact Heat
• Level 3 - Convective heat
• Level X - Radiant heat
• Level 4 - Small splashes of Molten Metal
• Level X - Large splashes of Molten Metal

• EN12477: 2001+A1:2005 Type A

Premium Golden Welders Gauntlet
Product Code: BFPGWN

• 16" Gold/Black cow split leather
• Fully lined
• Reinforced stiching
• Hand lining 100% cotton
• Outer in split leather

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level C - ISO 13997 Cut Resistance

• EN 407:2004
• Level 4 - Burning Behaviour
• Level 3 - Contact Heat
• Level 3 - Convective heat
• Level X - Radiant heat
• Level 4 - Small splashes of Molten Metal
• Level X - Large splashes of Molten Metal

• EN12477: 2001+A1:2005 Type A

Beeswift Gripper Glove
Product Code: BSGG001

Red Welders Gauntlet 14"
Product Code: C2WN

• Red Welders Gauntlet 14".
• Finger welts.
• Fully lined hand and cuff.

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 3 - Puncture
• Level B - ISO 13997 Cut Resistance

• EN407: 2004 4.2.3.X.4.X

• EN 12477:2001+A1:2005 - Type A

Red Welders Gauntlet 14" R/p
Product Code: C2WRPN

• Red Welders Gauntlet 14".
• Reinforced Palm (two layers of leather).
• Finger welts.
• Fully lined including cuff.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level C - ISO 13997 Cut Resistance

• EN 407:2004
• Level 4 - Burning Behaviour
• Level 3 - Contact Heat
• Level 3 - Convective heat
• Level X - Radiant heat
• Level 4 - Small splashes of Molten Metal
• Level X - Large splashes of Molten Metal

• EN 12477:2001 +A1:2005 - Type A

• Grey split leather B-Flex Hi Vis rigger glove.
• Saturn yellow poyester backing and safety cuff.
• Retro reflective tape to knuckle strip.
• Generous hand size.
• Fleece lining for warmth and comfort.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level A - ISO 13997 Cut Resistance



• Natural grey heavy tanned leather
• Natural colour promotes REACH and SVHC compliance.
• Natural leather thumb & first finger.
• Cotton drill back.
• Natural leather knuckle strip..
• Rubberized cuff.
• Lined palm & fingers.

• Minimal Risk.



• Natural grey heavy tanned leather
• Natural colour promotes REACH and SVHC compliance.
• Heavyweight cotton backing and safety cuff.
• Vein patch.
• Good fitting large size with fleecy lined palm and thumb-face
for added comfort.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level A - ISO 13997 Cut Resistance

• Natural grey heavy tanned leather
• Natural colour promotes REACH and SVHC compliance.
• Safety cuff fabric
• Superior performance and durability.
• Generously sized.
• Comfortable fleece lined palm and thumb-face.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level B - ISO 13997 Cut Resistance

• Natural grey heavy tanned leather
• Natural colour promotes REACH and SVHC compliance
• Heavy duty double palm rigger style glove.
• Generous hand size.
• Robust yet supple.
• Part fleece lined.
• Cotton drill back.
• Knuckle strap.
• Pasted cuff with vein patch.

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level C - ISO 13997 Cut Resistance

Canadian Yellow Hide Rigger Glove
Product Code: CANYHSPN

• Natural grey heavy tanned leather
• Natural colour promotes REACH and SVHC compliance.
• Canadian pattern yellow grain leather glove.
• Cotton drill back and pasted safety cuff.
• Large hand size with fleece lining.

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 4 - Tear Resistance
• Level 4 - Puncture
• Level B - ISO 13997 Cut Resistance

Drivers Glove Velcro Cuff
Product Code: DGVC

• High quality soft grain leather.
• knitted cotton back.
• Hook and loop cuff fastening.

• EN388: 2016
• Level 3 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance

Pu Coated 3 Fingerless Glove
Product Code: EC10N

• 35% polyester + 65% PU
• Polyurethane coated palm
• Machine knitted
• Integrated elasticated wrist

• EN388
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance

Polyester Knitted Liner Glove
Product Code: EC11

• 15 gauge seamless machine knitted polyester glove
• Minimal risk
• Excellent dexterity and comfort
• Recommended for general handling, inspection and assembly of components
• Can also be used as a thermal liner glove

Nitrile P/c Polyester Grey
Product Code: EC7NGY

• 35% polyester + 65% Nitrile
• Nitrile coated palm and fingers.
• Ventilated back.
• Lightweight for maximum dexterity and comfort with sensitivity.
• Suitable for general assembly handling and engineering applications

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance

Economy Grip Glove
Product Code: EC8NG

• Economy multi-purpose glove.
• Natural rubber coated palm.
• Knitted area on back of glove aids breathability comfort.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance

Economy Grip Glove
Product Code: EC8NOR

• Economy multi-purpose glove.
• Natural rubber coated palm.
• Knitted area on back to aid air passage and comfort.

• EN388: 2016
• Level 1 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance

Pu Coated Glove Black
Product Code: EC9NBL

• 35% polyester + 65% PU
• Polyurethane coated palm
• Machine knitted
• Integrated elasticated wrist

• EN388: 2016
• Level 4 - Abrasion
• Level X - Cut Resistance
• Level 2 - Tear Resistance
• Level 1 - Puncture
• Level A - ISO 13997 Cut Resistance